前一陣子因為業務上的需要,找了一些鋼管檢測的資料,尤其是有縫鋼管。

偶然間,發現日本友人將鋼管的相關規範目錄整理出來了,還加上了中文翻譯。(真是佛心~)

我將它又整理了一下,把一些詞彙換成台灣常用的名詞,大家應該比較容易理解。

在API的產品規範中規定使用ISO的規範,進行非破壞檢測。

台灣有許多鋼管廠,雖然不一定會申請API認證或執行非破壞檢測,還是提供給大家參考。

可以從這個目錄中找到你所需要的規範,再去購買或下載。

如果有侵犯版權,請告知,謝謝

 

鋼管相關國際規範目錄 : ISO 

  編號   中文名稱   英文名稱
  ISO 10124-1994   壓力用途的無縫鋼管和有縫(潛弧焊除外)鋼管 - 超音波檢驗夾層狀缺陷檢測   Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes - Ultrasonic testing for the detection of laminar imperfections
  ISO 10332-1994   壓力用途的無縫鋼管和有縫(潛弧焊除外)鋼管 - 超音波檢驗驗證液壓洩漏試驗   Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; ultrasonic testing for verification of hydraulic leak-tightness
  ISO 10543-1993   壓力用無縫及熱拉伸有縫鋼管 - 全周向超音波厚度檢測   Seamless and hot-stretch-reduced welded steel tubes for pressure purposes; full peripheral ultrasonic thickness testing
  ISO 10763-1994   液壓傳動 - 平口無縫和精密有縫鋼管 - 尺寸及標稱工作壓力   Hydraulic fluid power - Plain-end, seamless and welded precision steel tubes - Dimensions and nominal working pressures
  ISO 11120-1999   氣瓶 - 可重複的150升~3000公升水容量充裝無縫鋼管氣瓶 - 設計、結構和試驗   Gas cylinders - Refillable seamless steel tubes of water capacity between 150 l and 3000 l - Design, construction and testing
  ISO 1127-1992   不銹鋼管 - 尺寸、公差和單位長度的公稱品質   Stainless steel tubes; dimensions, tolerances and conventional masses per unit length
  ISO 1129-1980   鍋爐、過熱器和熱交換器用鋼管 - 尺寸、公差和單位常用重量   Steel tubes for boilers, superheaters and heat exchangers; Dimensions, tolerances and conventional masses per unit length
  ISO 11484-1994   壓力用途鋼管 - 非破壞檢驗人員的資格及認證   Steel tubes for pressure purposes - Qualification and certification of non-destructive testing (NDT) personnel
  ISO 11496-1993   壓力用途的承壓無縫和有縫鋼管 - 音波檢測管端夾層   Seamless and welded steel tubes for pressure purposes; ultrasonic testing of tube ends for the detection of laminar imperfections
  ISO 11960 Technical Corrigendum 1-2006   石油和天然氣工業 - 油井套管或油管用鋼管 - 技術勘誤1   Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells; Technical Corrigendum 1
  ISO 11960-2004   石油和天然氣工業 - 油井套管和油管用鋼管   Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells
  ISO 11961-1996   石油和天然氣工業 - 鑽井杆用鋼管 - 規範   Petroleum and natural gas industries - Steel pipes for use as drill pipe - Specification
  ISO 12094-1994   壓力用途的承壓有縫鋼管 - 製程中超音波檢測有縫鋼管用鋼帶/鋼板夾層缺陷   Welded steel tubes for pressure purposes - Ultrasonic testing for the detection of laminar imperfections in strips/plates used in the manufacture of welded tubes
  ISO 12095-1994   壓力用途的承壓無縫和有縫鋼管 - 液滲透試驗   Seamless and welded steel tubes for pressure purposes - Liquid penetrant testing
  ISO 12096-1996   壓力用途的承壓潛弧銲有縫鋼管 - 焊縫缺陷檢測用X射線檢查   Submerged arc-welded steel tubes for pressure purposes - Radiographic testing of the weld seam for the detection of imperfections
  ISO 13663-1995   壓力用途的承壓有縫鋼管 - 超音波檢測焊縫周圍夾層缺陷   Welded steel tubes for pressure purposes - Ultrasonic testing of the area adjacent to the weld seam for the detection of laminar imperfections
  ISO 13664-1997   壓力用途的承壓無縫和有縫鋼管 - 磁粉探傷檢驗管端夾層缺陷   Seamless and welded steel tubes for pressure purposes - Magnetic particle inspection of the tube ends for the detection of laminar imperfections
  ISO 13665-1997   壓力用途的承壓無縫和有縫鋼管 - 磁粉探傷檢驗管身表面缺陷   Seamless and welded steel tubes for pressure purposes - Magnetic particle inspection of the tube body for the detection of surface imperfections
  ISO 13680 Technical Corrigendum 2-2004   石油和天然氣工業-用作套管、油管和接箍的防腐蝕合金無縫鋼管 - 交貨技術條件 - 技術勘誤2   Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions; Technical Corrigendum 2
  ISO 13680-2000   石油和天然氣工業 - 套管、油管和接箍防腐合金無縫鋼管 - 交貨技術條件   Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions
  ISO 15741-2001   色漆和清漆 - 海上和近海的非腐蝕氣體鋼管內側的減小摩擦塗層   Paints and varnishes - Friction-reduction coatings for the interior of on- and offshore pipelines for non-corrosive gases
  ISO 16172-2006   波紋鋼管用連續熱浸金屬塗層鋼板   Continuous hot-dip metallic-coated steel sheet for corrugated steel pipe
  ISO 2037-1992   食品工業用不銹鋼管   Stainless steel tubes for the industry
  ISO 2937-1974   機械用平口無縫鋼管   Plain end seamless steel tubes for mechanical application
  ISO 3183-2007   石油和天然氣工業 - 管道運輸系統用鋼管   Petroleum and natural gas industries - Steel pipe for pipeline transportation systems
  ISO 3183-3 Technical Corrigendum 1-2000   石油和天然氣工業 - 管道鋼管 - 交貨技術條件 - 第3部分 : C級鋼管的要求 - 技術勘誤1   Petroleum and natural gas industries - Steel pipe for pipelines - Technical delivery conditions - Part 3: Pipes of requirement class C; Technical Corrigendum 1
  ISO 3304-1985   平口精密無縫鋼管 - 交貨技術條件   Plain end seamless precision steel tubes; Technical conditions for delivery
  ISO 3305-1985   平口精密有縫鋼管 - 交貨技術條件   Plain end welded precision steel tubes; Technical conditions for delivery
  ISO 3306-1985   平口精密尺寸有縫鋼管 - 交貨技術條件   Plain end as-welded and sized precision steel tubes; Technical conditions for delivery
  ISO 3545-1-1989   鋼管和管件 - 規範中使用的符號 - 第1部分 : 圓形截面的管和管狀附件   Steel tubes and fittings; symbols for use in specifications; part 1: tubes and tubular accessories with circular cross-section
  ISO 3545-2-1989   鋼管和管件 - 規範中使用的符號 - 第2部分 : 正方形和矩形中空截面   Steel tubes and fittings; symbols for use in specifications; part 2: square and rectangular hollow sections
  ISO 3545-3-1989   鋼管和管件 - 規範中使用的符號 - 第3部分 : 圓形截面管件   Steel tubes and fittings; symbols for use in specifications; part 3: tubular fittings with circular cross-section
  ISO 4200-1991   平口有縫和無縫鋼管 - 管的尺寸和單位長度重量的一覽表   Plain end steel tubes, welded and seamless; general tables of dimensions and masses per unit length
  ISO 4394-1-1980   流體傳動系統和元件 - 缸筒 - 第1部分 :對特殊精加工內徑的鋼管的要求   Fluid power systems and components- Cylinder barrels; Part 1 : Requirements for steel tubes with specially finished bores
  ISO 5252-1991   鋼管 - 公差系列   Steel tubes; tolerance systems
  ISO 5256-1985   地下或水下管路用鋼管和管件 - 管內外塗瀝青或瀝青油衍生物   Steel pipes and fittings for buried or submerged pipe lines; External and internal coating by bitumen or coal tar derived materials
  ISO 5625-1978   造船 - 鋼管管路法蘭焊接通艙管 PN6、PN10和PN16   Shipbuilding; Welded bulkhead pieces with flanges for steel pipework; PN 6, PN 10 and PN 16
  ISO 65-1981   按照ISO 7/1 車螺紋的碳鋼鋼管   Carbon steel tubes suitable for screwing in accordance with ISO 7/1
  ISO 6758-1980   熱交換器用有縫鋼管   Welded steel tubes for heat exchangers
  ISO 6759-1980   熱交換器用無縫鋼管   Seamless steel tubes for heat exchangers
  ISO 6761-1981   鋼管 - 焊接用管端和配件的預處理   Steel tubes; Preparation of ends of tubes and fittings for welding
  ISO 7598-1988   適於按照ISO 7/1車螺紋用不銹鋼管   Stainless steel tubes suitable for screwing in accordance with ISO 7-1
  ISO 8535-1-2006   柴油發動機 - 高壓噴射燃油管用鋼管 - 第1部分 : 無縫冷拉制單壁鋼管的要求   Diesel engines - Steel tubes for high-pressure fuel injection pipes - Part 1: Requirements for seamless cold-drawn single-wall tubes
  ISO 8535-2-2003   壓燃式發動機 - 高壓燃油噴管用鋼管 - 第2部分 : 組合管的要求   Compression-ignition engines - Steel tubes for high-pressure fuel injection pipes - Part 2: Requirements for composite tubes
  ISO 9095-1990   鋼管 - 鑒別材料用連續符號標誌和顏色碼   Steel tubes; continuous character marking and colour coding for material identification
  ISO 9302-1994   壓力用途的無縫鋼管和有縫(潛弧焊除外)鋼管 - 電磁檢測驗證液壓洩漏法   Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; electromagnetic testing for verification of hydraulic leak-tightness
  ISO 9303-1989   壓力用途的無縫鋼管和有縫(潛弧焊除外)鋼管 - 全周向超音波試驗檢測縱向缺陷   Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; full peripheral ultrasonic testing for the detection of longitudinal imperfections
  ISO 9304-1989   壓力用途的無縫鋼管和有縫(潛弧焊除外)鋼管 - 渦流電流檢測缺陷   Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; eddy current testing for the detection of imperfections
  ISO 9305-1989   壓力用途的無縫鋼管 - 超音波全周向檢測橫向缺陷   Seamless steel tubes for pressure purposes; full peripheral ultrasonic testing for the detection of transverse imperfections
  ISO 9329-1-1989   壓力用途的無縫鋼管 - 交貨技術條件 - 第1部分 : 規定室溫性能的非合金鋼   Seamless steel tubes for pressure purposes; technical delivery conditions; part 1: unalloyed steels with specified room temperature properties
  ISO 9329-2-1997   壓力用途的無縫鋼管 - 交貨技術條件 - 第2部分 : 規定高溫性能的非合金鋼和合金鋼   Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Unalloyed and alloyed steels with specified elevated temperature properties
  ISO 9329-3-1997   壓力用途的無縫鋼管 - 交貨技術條件 - 第3部分 : 規定低溫性能的非合金鋼和合金鋼   Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Unalloyed and alloyed steels with specified low temperature properties
  ISO 9329-4-1997   壓力用途的無縫鋼管 - 交貨技術條件 - 第4部分 : 奧氏體系不銹鋼   Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Austenitic stainless steels
  ISO 9330-1-1990   壓力用途的有縫鋼管 - 交貨技術條件 - 第1部分 : 規定室溫性能的非合金鋼管   Welded steel tubes for pressure purposes; technical delivery conditions; part 1: unalloyed steel tubes with specified room temperatures properties
  ISO 9330-2-1997   壓力用途的有縫鋼管 - 交貨技術條件 - 第2部分 : 規定高溫性能的非合金鋼管和合金鋼管電阻焊接和感應焊接   Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified elevated temperature properties
  ISO 9330-3-1997   壓力用途的有縫鋼管 - 交貨技術條件 - 第3部分 : 規定低溫性能的非合金鋼管和合金鋼管電阻焊接和感應焊接   Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified low temperature properties
  ISO 9330-4-2000   壓力用途的焊接鋼管 - 交貨技術條件 - 第4部分 : 規定高溫性能的非合金鋼管和合金鋼管潛弧焊接   Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Submerged arc-welded unalloyed and alloyed steel tubes with specified elevated temperature properties
  ISO 9330-5-2000   壓力用途的焊接鋼管 - 交貨技術條件 - 第5部分 : 規定低溫性能非合金鋼管和合金鋼管的潛弧焊接   Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc-welded unalloyed and alloyed steel tubes with specified low temperature properties
  ISO 9330-6-1997   壓力用途的焊接鋼管 - 交貨技術條件 - 第6部分 : 奧氏體系不銹鋼管的焊接長度   Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Longitudinally welded austenitic stainless steel tubes
  ISO 9402-1989   壓力用途的無縫鋼管和焊接(潛弧焊除外)鋼管 - 全周向磁場/磁漏檢測鐵磁性鋼管縱向缺陷   Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of longitudinal imperfections
  ISO 9455-12-1992   軟焊劑 - 試驗方法 - 第12部分 : 鋼管腐蝕試驗   Soft soldering fluxes; test methods; part 12: steel tube corrosion test
  ISO 9598-1989   壓力用途的無縫鋼管 - 全周向磁場/磁漏檢測鐵磁性鋼管橫向缺陷   Seamless steel tubes for pressure purposes; full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of transverse imperfections
  ISO 9764-1989   壓力用途的電阻焊和感應焊鋼管 - 超音波檢驗焊縫的縱向缺陷   Electric resistance and induction welded steel tubes for pressure purposes; ultrasonic testing of the weld seam for the detection of longitudinal imperfections
  ISO 9765-1990   壓力用途的潛弧焊鋼管 - 超音波檢測焊縫的縱向和/或橫向缺陷   Submerged arc-welded steel tubes for pressure purposes; ultrasonic testing of the weld seam for the detection of longitudinal and/or transverse imperfections

, , , ,

Inspection 發表在 痞客邦 PIXNET 留言(0) 人氣()